You are visiting a website that is not intended for your region

The page or information you have requested is intended for an audience outside the United States. By continuing to browse you confirm that you are a non-US resident requesting access to this page or information.

Switch to the US site

Select Your Country or Region
Send
Kontakt
multi-use bioreactor washing

Proven process on how to best clean and sterilize multi-use bioreactors

Download the white paper
Topics

Proven process on how to best clean and sterilize multi-use bioreactors

Proper preparation of a multi-use bioreactor will increase productivity, reproducibility and avoid process interruptions. This requires a thorough cleaning of the vessel and all associated components.

The result: Accurate and repeatable result, minimizing research downtime and decreasing labor cost.

Bioreactor preparation solution

6 important steps in the cleaning and sterilization process

  1. Determine if Repeat  or New Process
  2. Disassembly and Washing Prep
  3. Rack Loading, Washing and Reassembly
  4. Preparation for Sterilization
  5. Sterilization
  6. Return to Service

A programmable labware washer with specialty multi-use bioreactor rack assures thorough cleaning, better reproducibility and reduced labor.

The Solution

The combination of pre-validated washing and sterilization performed in the washer and sterilizer maintain an approved standard for quality control that reduces the chance of human error or deviation from proven process

The white paper provides information on how to reduce labor, increase throughput, minimize downtime and have a clean bioreactor ready for the final sterilization.

Download the white paper here:

Bioreactor Preparation Solutions white paper.png

Related articles

Top 3 Causes of Cross Contamination in Biosafety Facilities
  • Research Laboratories

Top 3 Causes of Cross Contamination in Biosafety Facilities

Cross contamination in BSL-3 and BSL-4 laboratories represents a significant risk to personnel and the surrounding community due to the dangerous agents housed within these facilities. 

Learn more

Factors for Safe Material Transfer in BSL-3 and BSL-4 Facilities
  • Research Laboratories

5 Factors for Safe Material Transfer in BSL-3 and BSL-4 Facilities

BSL-3 and BSL-4 laboratories highlight the fact that if proper protocols are not followed, contamination can cause detrimental results.

Learn more

The 4 Pillars of successful labware cleaning
  • Research Laboratories

The 4 Pillars of Successful Labware Cleaning

Clean labware is a critical component in any laboratory because contaminated labware can lead to false test results and expensive re-testing.

Learn more

Sophie de Valk PhD student at Delft University of Technology in the Netherlands with an getinge Applikon bioreactor
  • Research Laboratories

An automated bioreactor solution tailored for the next generation of science

At the Delft University of Technology in the Netherlands, professors and PhD students needed a new solution for evolutionary engineering – to improve the study of genetically engineered cells in the pursuit of replacing more petrochemicals with plant-based materials. This called for a robust, flexible, and automated bioreactor setup tailored to meet the specific challenges related to evolution studies.

Læs mere

bioreactor sterilization
  • Research Laboratories

Best Practices for Multi-Use Bioreactor Sterilization

Regardless of whether the bioreactor is being prepared for a same-use application or an entirely different one, all bioreactor components, as well as liquid media, must be made ready through an effective and reproducible process.

Læs mere

Abonnement